What are the three aspects to consider when selecting Metal Stamping materials?

1. Requirements for use.

1) Use scenarios for Metal Stamping.

Specifically, under what environmental conditions are metal stamping parts used, what specific requirements are there for strength, hardness, corrosion resistance, etc.

2) Requirements on the size and quality of metal stampings.

How many stamping parts need to be used with other parts, which depends on the dimensional accuracy requirements of the stamping parts when they are matched.

3) The importance of metal stampings.

Metal Stamping Door Clasp Shellfor

For assembled products, the impact of Stamping Mould on the entire product.

2. Process requirements.

1) The manufacturing process of blanks;

2) stamping processing;

3) heat treatment;

4) Surface treatment.

3.Economic requirements:

1) material price;

2) Processing batch and processing cost;

3) the utilization rate of materials;

4) Alternative materials.

Also, consider the availability of local materials

Today's economic environment is not good, and it is difficult for all walks of life. The metal stamping parts processing industry also encountered considerable resistance, but every step must be taken in order to continue its development. To achieve the sustainable development of metal stamping parts, for the metal stamping parts industry, it is necessary to know how to change and adapt to the development of the market.

1. Establish your own brand. The future market is the brand's market. Although the metal stamping parts are small, they must also establish their own brand advantages. Sometimes the size of the factory is not necessarily required, but it must be formal. Each process has strict management regulations, it must not be like a piece of loose sand!

2. Study with an open mind. As the saying goes, live till you learn. The metal stamping parts processing industry is the same, and its own strength and energy are always limited. Only continuous learning can make progress, learning the strengths of others to make up for their own shortcomings.

3. In the process of development of metal stamping parts processing enterprises, technology development should always be given top priority. Grasp the development trend of the market, cultivate a group of technical talents, improve the technology of stamping processing and mold manufacturing, and develop the direction of metal stamping parts toward the direction of relatively large-scale strength such as automobiles, aviation, mobile phones, computers and electronics. This is what people say every day is to enjoy the coolness under the big tree. Only by grasping the market trends can we continuously expand our market share in the metal stamping industry. Our company also has Metal Stamping Door Clasp Shellfor sale, welcome to consult.