Test Equipment of Safety Glazing Materials in Buildings

Yuanchen supply all kinds of testing equipment for safety glazing materials and PV module.

All equipments design and produce according standard.

Ten Years Experience in Production and Processing

Stock Supply/Complete Set of Glass Testing Equipment

Major Suppliers of China's Market Safety Glass Testing Equipment

OEM/ODM/Development, Design and Processing of Various Testing Equipment

Test Frame of impact Test for Safety Glazing Materials in Buildings

Related Standards:

1)    AS/NZS 2208 Safety glazing materials in buildings

       Appendix D: Impact Test

2)    GB 15763.3 Safety glazing materials in building Part 3: Laminated glass

       Appendix C: Test device for the impact performance of shot bag

3)    ANSI Z97.1 Safety Glazing Materials Used in Buildings

       - Safety Performance Specifications and Methods of Test

       Clause 5.1: Impact Test

Application:

4)     Determining the resistance of glazing materials to impact by the penetration method

Test Frame:

5)    Frame Size:1900mm×1500mm×3570mm

6)    Samples Size:1930mm×864mm

7)    Lift: Electric

8)    Release: Auto

9)    Maximum impact height: 1200mm (customized)

10)  Rubber Pad Width: 15mm

11)  Rubber Pad Thickness: 3mm

12)  Rubber Pad Hardness: Shore A50

Impact Shot Bag:

13)  Reinforced leather bag filled with chiller lead shot

Technical Data:

14)  Weight:45kg±0.1kg 46kg±0.1kg

15)  Height: 330mm ± 13mm

16)  Max diameter: 250mm

17)  Leather thickness: 0.15mm

18)  Lead sand size: 2.5mm

Customized: 25kg 48kg

Ball tests device of Mechanical tests of Safety glazing materials

Related Standard:

1)        ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests 

           Clause 6: 227 g ball test, Clause 7:2260 g ball test

2)        GB 15763.3 Safety glazing materials in building Part 3:Laminated glass 

           Appendix B Drop ball impact specimen support

Principle:

3)    Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object

Apparatus:

4)        Hardness steel ball:

a)        2260g ± 20g, diameter of approximately 82.5mm

b)        227g ± 2g, diameter of approximately 38 mm

c)        1040g ± 10g, diameter of approximately 63.5 mm

d)       508g±3g, diameter of approximately 50 mm

5)        Frame Height: 1000mm, 5000mm, 12000mm, Customized

6)        Automatic release and lift. Power: 220V 50Hz 580W

7)        Supporting fixture:

a)        Support Size: 350mm*350mm  and 660mm*660mm (Customized)

b)        Frame width 15mm

c)        Steel box height 150mm

d)       Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50

e)        Interposed sheet of rubber: thickness 3mm, hardness shore A50

8)        Applied Test Pieces Size: 300mm*300mm   610m* 610mm

Dew Point Meter for Insulating glass

Measuring range: -80℃ ~ 100℃
Measurement accuracy: less than or equal to 1 ℃
Test tube height: 300mm
Test tube diameter:  50mm
Test environment:
Test temperature: 23℃ + 2℃;
Relative humidity: 30% ~ 75%;

Water bath apparatus of Boil test for safety glazing materials in Building

High-temperature test oven of Glass in building

Heat resistance test box of Safety glazing materials in building

Related Standard:

1)        EN ISO 12543 - 4 Glass in building -Laminated glass and laminated safety glass

           - Part 4: Test methods for durability – Clause 5 High-temperature test

2)        AS/NZS 2208 Safety glazing materials in buildings – Appendix F Boil Test

3)        GB 15763.3 Safety glazing materials in building Part 3:Laminated glass

           Clause 7.8 Heat resistance test

4)        ANSI Z97.1 Safety Glazing Materials Used in Buildings

           - Safety Performance Specifications and Methods of Test 

           Clause 5.3.2 – ( 1 ) Boil Test

Data:

5)        Power: 220V 50Hz 3Kw (Customized)

6)        Outside Size: 400mm*255mm*480mm

7)        Inner Size: 400mm*255mm*480mm

8)        Rack:340mm*235mm*350mm

9)        At most 6 samples with 300mm*300mm

Scope:

10)    Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling

Principle:

11)     Specimens are immerse in hot water and boiling water for specified period of time and inspect bubbles and others defects

Apparatus:

12)    The apparatus include two water baths, each of sufficient size to hold the test specimen fully immersed vertically on edge for the duration test.

Samples:

13)    Three specimen of size 300mm*300mm manufacture in a manner identical with impact test specimens and of like thickness shall be tested.

14)    These specimens may be cut from production samples of the size and thickness submitted for impact testing.

15)    For heat strengthened or toughened laminated glass, test specimen may be cut from a similar original sheet of annealed laminated glass

Procedure:

16)    Immerse the specimens vertically on edge in a bath of water maintained at a temperature of 66°C±3°C for 3 min

17)    Quickly transfer the specimens to a bath of water maintain at boiling point. Immerse the specimens vertically on edge for 2 h

18)    Remove the specimens and examine for the bubbles and others defects

Head-form Test Apparatus for Safety glazing materials

Impactor of Impact Test for Safety Glazing Materials Used in Buildings

Shot Bag of Test device for the impact performance for Safety glazing materials in building

Impacting Shot Bag of Impact Test for Safety glazing materials in buildings

Related Standards:

1)        AS/NZS 2208 Safety glazing materials in buildings – Appendix D: Impact Test

2)        GB 15763.3 Safety glazing materials in building Part 3: Laminated glass

           Appendix C: Test device for the impact performance of shot bag

3)        ANSI Z97.1 Safety Glazing Materials Used in Buildings

          - Safety Performance Specifications and Methods of Test

          Clause 5.1: Impact Test

Application:

4)        Determining the resistance of glazing materials to impact by the penetration method

Structure:

5)        Reinforced leather bag filled with chiller lead shot

Technical Data:

6)        Weight:45kg±0.1kg 46kg±0.1kg

7)        Height: 330mm ± 13mm

8)        Max diameter: 250mm

9)        Leather thickness: 0.15mm

10)     Lead sand size: 2.5mm

Customized 25kg 48k